Active

Contract Opportunity

Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.

***Sources Sought***

This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10.

*** NO SOLICITATION IS BEING ISSUED AT THIS TIME ***

The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below. Please review the below NSNs and provide us with any additional sources that are able to manufacture these items. Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information. All of this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil. Phone 614 692-0639. We thank you in advance for your assistance.

NSN NAME

2510-01-521-2739 PARTS KIT, FLOOR, VEHICULAR

2510-01-521-8018 PARTS KIT, FLOOR, VEHICULAR

2510-01-582-5403 PARTS KIT, FLOOR, VEHICULAR

Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary.

*** NO SOLICITATION IS BEING ISSUED AT THIS TIME ***

---------------------------------------

ITEM DESCRIPTIONS:

NSN: 2510-01-521-2739

PARTS KIT,FLOOR,VEHICULAR

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

CA061: ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE

OFFERS IS NOT AVAILABLE AT THE PROCUREMENT

AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE

DATA PACKAGE INCLUDING DATA FOR THE APPROVED

AND ALTERNATE PART FOR EVALUATION.

ZD074: THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL

OF A TYPE')

OVERSEAS HARDWOODS CO INC 8N013 P/N M871A2-KIT

PREP FOR DELIVERY

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:FW OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

CS259: "PRESERVATION & PACKAGING SHALL BE

I/A/W THE LATEST REVISION OF MILITARY

SPECIFICATION MIL-STD-2073-1 APPENDIX D,

FOR PACKAGING OF "KITS".

PER MIL-STD-2073-1D, APPENDIX D, PARAGRAPH

D.3.1.b: METHOD OF PRESERVATION SHALL AFFORD

ADEQUATE PROTECTION TO THE MOST CRITICAL ITEM

CONTAINED WITHIN THE KIT.

NOTE: All loose hardware shall be contained

within a sealed container (bag/box) and the

highest applicable preservation method (based

on physical characteristics of items) shall be

applied to ensure items will not be damaged or

experience corrosion. In addition, packaged

hardware shall be placed within each individual

unit container to ensure items do not damage

(dent, scratch, nick, etc.) the part or any

components therein.

NOTE: Hardware for shipments cannot be shipped

in bulk. It is not an acceptable practice.

Material must arrive in serviceable condition

and meet the contractual quantity unit pack

requirements. Thus, requiring no additional

sorting, packaging, and/or marking by user or

depot personnel.

ADDITIONAL SPECIAL MARKING REQUIREMENTS:

02 - ARROW UP;

OPEN THIS SIDE.

SEGREGATION AND INDIVIDUAL IDENTIFICATION

REQUIREMENTS ARE LISTED IN MIL-STD-2073-1,

APPENDIX D, PARAGRAPH D.4.2.

A PARTS LIST (WITH PART NAME, PART NUMBER

& QUANTITY) SHALL BE INCLUDED WITHIN EACH KIT.

IF APPLICABLE, ASSEMBLY INSTRUCTIONS SHALL

ALSO BE INCLUDED WITHIN EACH PACKAGE.

-----------------------------------------------------------------

NSN: 2510-01-521-8018

PARTS KIT, FLOOR, VEHICULAR.(WOOD FLOORING)

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

END ITEM, M872A4 TRAILER (600 DECK SCREWS ARE NOT INCLUDED IN THE ASSEMBLY PER OEM)

CA060: NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS

REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE

INCLUDING DATA FOR THE APPROVED AND ALTERNATE

PART FOR EVALUATION.

ZD074: THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL

OF A TYPE')

OVERSEAS HARDWOODS CO INC 8N013 P/N M872-A4

PREP FOR DELIVERY

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C

UNIT CONT:FU OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

CS259: "PRESERVATION & PACKAGING SHALL BE

I/A/W THE LATEST REVISION OF MILITARY

SPECIFICATION MIL-STD-2073-1 APPENDIX D,

FOR PACKAGING OF "KITS".

QUANTITY UNIT PACK (QUP) IS ONE (1).

EACH KIT IS REQUIRED TO BE PACKAGED INDIVIDUALLY.

PER MIL-STD-2073-1, APPENDIX D, PARAGRAPH

D.3.1.b: METHOD OF PRESERVATION (MOP) SHALL

AFFORD ADEQUATE PROTECTION TO THE MOST CRITICAL

ITEM CONTAINED WITHIN THE KIT.

PACK CODE=Z: CONTRACTOR SHALL ENSURE PACKAGE

DESIGN IS ADEQUATE FOR DOD DELIVERIES PER

ASTM D4169, DISTRIBUTION CYCLE 18, ASSURANCE

LEVEL II, ACCEPTANCE CRITERIA 3 -OR- PROVIDE

MILITARY PACKAGING DESIGN VALIDATION

DOCUMENTATION LISTED IN MIL-STD-2073-1,

PARAGRAPH 5.6 AND APPENDIX F.

NOTE: All loose hardware shall be contained

within a sealed container (bag/box) and the

highest applicable preservation method (based

on physical characteristics of items) shall be

applied to ensure items will not be damaged or

experience corrosion. In addition, packaged

hardware shall be placed within each individual

unit container to ensure items do not damage

(dent, scratch, nick, etc.) the part or any

components therein.

NOTE: Hardware for shipments cannot be shipped

in bulk. It is not an acceptable practice.

Material must arrive in serviceable condition

and meet the contractual quantity unit pack

requirements. Thus, requiring no additional

sorting, packaging, and/or marking by user or

depot personnel.

ZZ - SPECIAL MARKING REQUIREMENTS:

02 - ARROW UP

14 - CENTER OF BALANCE

OPEN THIS SIDE

MECHANICAL HANDLING REQUIRED

SEGREGATION AND INDIVIDUAL IDENTIFICATION

REQUIREMENTS ARE LISTED IN MIL-STD-2073-1,

APPENDIX D, PARAGRAPH D.4.2.

A PARTS LIST (WITH PART NAME, PART NUMBER

& QUANTITY) SHALL BE INCLUDED WITHIN EACH KIT

PACKING LIST.

IF APPLICABLE, ASSEMBLY INSTRUCTIONS SHALL

ALSO BE INCLUDED WITHIN EACH UNIT PACKAGE.

PACKAGE DESIGN SHALL ENSURE SAFE DELIVERY

TO ULTIMATE USER.

IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,

PACKAGING, PACKING AND MARKING.

---------------------------------------------------------

NSN: 2510-01-582-5403

PARTS KIT,FLOOR,VEH

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

ZD074: THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL

OF A TYPE')

OVERSEAS HARDWOODS CO INC 8N013 P/N M1FRFKT

PREP FOR DELIVERY

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C

UNIT CONT:F2 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

CS259: "PRESERVATION & PACKAGING SHALL BE

I/A/W THE LATEST REVISION OF MILITARY

SPECIFICATION MIL-STD-2073-1 APPENDIX D,

FOR PACKAGING OF "KITS".

DESICCANT REQUIRED AND SHALL NOT MAKE DIRECT

CONTACT WITH ANY KIT COMPONENTS - SEE MIL-STD-2073-1,

PARAGRAPHS 5.2.3.7 a-c FOR DETAILS ABOUT DESICCANT

AND HOW TO CALCULATE QUANTITY.

PER MIL-STD-2073-1, APPENDIX D, PARAGRAPH

D.3.1.b: METHOD OF PRESERVATION (MOP) SHALL

AFFORD ADEQUATE PROTECTION TO THE MOST CRITICAL

ITEM CONTAINED WITHIN THE KIT.

PACK CODE=Z: CONTRACTOR SHALL ENSURE PACKAGE

DESIGN IS ADEQUATE FOR DOD DELIVERIES PER

ASTM D4169, DISTRIBUTION CYCLE 18, ASSURANCE

LEVEL II, ACCEPTANCE CRITERIA 3 -OR- PROVIDE

MILITARY PACKAGING DESIGN VALIDATION

DOCUMENTATION LISTED IN MIL-STD-2073-1,

PARAGRAPH 5.6 AND APPENDIX F.

NOTE: All loose hardware shall be contained

within a sealed container (bag/box) and the

highest applicable preservation method (based

on physical characteristics of items) shall be

applied to ensure items will not be damaged or

experience corrosion. In addition, packaged

hardware shall be placed within each individual

unit container to ensure items do not damage

(dent, scratch, nick, etc.) the part or any

components therein.

NOTE: Hardware for shipments cannot be shipped

in bulk. It is not an acceptable practice.

Material must arrive in serviceable condition

and meet the contractual quantity unit pack

requirements. Thus, requiring no additional

sorting, packaging, and/or marking by user or

depot personnel.

ZZ = SPECIAL MARKING REQUIREMENTS:

02 - ARROW UP

OPEN THIS SIDE.

14 - CENTER OF BALANCE

24 - OPEN FOR INSPECTION OR USE ONLY

ATTENTION:

INDOOR STORAGE ONLY

FOR QUALITY CONTROL PURPOSES

TEAM LIFT OR MECHANICAL HANDLING

SEGREGATION AND INDIVIDUAL IDENTIFICATION

REQUIREMENTS ARE LISTED IN MIL-STD-2073-1,

APPENDIX D, PARAGRAPH D.4.2.

A PARTS LIST (WITH PART NAME, PART NUMBER

& QUANTITY) SHALL BE INCLUDED WITHIN EACH KIT.

IF APPLICABLE, ASSEMBLY INSTRUCTIONS SHALL

ALSO BE INCLUDED WITHIN EACH UNIT PACKAGE.

PACKAGE DESIGN SHALL ENSURE SAFE DELIVERY

TO ULTIMATE USER.

----------------------------------

Attachments/Links