Active

Contract Opportunity

Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.

NSN(s): 6140-01-446-9498

Item Description: SEE RFQ

Manufacturer’s Code and Part Number (if applicable): N/A

Drawing Number (if applicable): SEE RFQ

Specification Number (if applicable): N/A

Qualification Requirements (e.g. QPL) and where information on qualification requirements may be obtained. (if applicable): N/A

Quantity (including option quantity) :

Anticipated type of contract is an IDC. Items to be shipped to various military depot locations within established minimum & maximum quantity limits on an as needed basis.

Unit of Issue: EA

Destination Information: FOB DESTINATION – STOCK ONLY

Delivery Schedule: SEE RFQ

**

Anticipated type of contract is an Indefinite Quantity Contract (IQC), I/A/W FAR Part 12 procedures.

All responsible SMALL BUSINESS sources may submit an offer/quote which shall be considered.

---

( x ) The solicitation will be available on DLA’s Internet Bid Board Site (https://www.dibbs.bsm.dla.mil/RFP/) on or about 09/06/2022.

( x ) The Small Business size standard is _1250_ employees.

( x ) The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. The total duration (base plus option years) shall not exceed 5 years.

(x ) While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation

TYPE OF SET-ASIDE: 100% SBSA

-----------------------------------------------------------------------------------------------------------------------------

NSN: 6140-01-446-9498

BATTERY, STORAGE

LEAD-ACID, DRY CHARGED, MAINTENANCE FREE

SUPPLIED WITH ACID OVERPACK (ELECTROLYTE)

D.O.T. CLASS: CORROSIVE UN2796

SHIPPING NAME: BATTERY, FLUID ACID

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RT001: MEASURING AND TEST EQUIPMENT

CONTRACTOR FAT

NUMBER OF UNITS REQUIRED TO BE TESTED: 10 BATTERIES, 4 EA.

CONTAINER, 7 EA. COVERS PER ATPD 2206

ZD025: MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT

CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

ZD072: Hazard Communication Standard Notice:

Effective June 1, 2015, Federal Standard No. 313-E, Material Safety

Data, Transportation Data and Disposal Data for Hazardous Materials

Furnished to Government Activities, establishes the requirement for

preparation and submission of Safety Data Sheets (SDS) in lieu of

Material Safety Data Sheets (MSDS) by suppliers who provide hazardous

materials to government activities.

The Occupational Safety and Health Administration (OSHA) has modified

its Hazard Communication Standard (HCS) to conform to the United Nations

Globally Harmonized System of Classification and Labeling of Chemicals.

As a result of this change, GSA revised Federal Standard No. 313-E

requiring Safety Data Sheets for classifying chemicals and communicating

the applicable information on labels.

In accordance with the revised standard after June 1, 2015:

1. Suppliers will be required to submit, to the contracting officer for

review and approval prior to award, safety data sheets consistent with

the requirements found at 29 C.F.R. 1910.1200 for hazardous materials

delivered to the Government.

2. Suppliers will also be required to submit, to the contracting officer

for review and approval prior to award, Hazardous Communication Standard

(HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or

current Consumer Product Safety Act (CPSA), Federal Hazardous Substance

Act (FHSA) labels when subject to labeling requirements under those

statutes. This product labeling is required for hazardous materials

delivered to the Government.

3. Finally, suppliers must train their employees on the new safety data

sheets, hazardous communication labels, and requirements of 29 C.F.R.

1910.1200.

For more information on SDS, refer to OSHAs website, available at:

https://www.osha.gov/law-regs.html

For information on 29 C.F.R. 1910.1200, refer to the below link:

https://www.osha.gov/dsg/hazcom/index.html

RS062: Shelf life requirement RS001 for a TYPE 2 (CODE 9) item with a

shelf life of 60 month (extendable) applies to this item.

ZD080 :SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

SHELF LIFE: TYPE II, 60 MONTHS

FIRST ARTICLE TESTING AS REQUIRED BY PARA 4.4

CORRECTION TO ATPD 2206 REV 7 AS FOLLOWS:

PARA. 4.6.17.A IS CHANGED TO INDICATE "-54 +/-

1 DEGREE C" IN LIEU OF "-48 +/- 1 DEGREE C".

EXCEPTION TO SPEC:

DELETE REQUIREMENT 3.3.12,

DELETE 3.2.2 IN ITS ENTIRETY AND REFERENCE TO

3.2.2 IN 4.6.1

END OF EXCEPTIONS.

A0003: MIL-STD-130N(1) DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

CA070: FULL AND OPEN COMPETITION APPLY

ZD074: THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL OF A TYPE')

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 ATPD2206

REVISION NR 7 DTD 08/13/2001

PART PIECE NUMBER: 6TMF/TYPEI

IAW REFERENCE SPEC NR MS52149G NOT 2

REVISION NR DTD 06/12/2015

PART PIECE NUMBER:

PREP FOR DELIVERY

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:D4 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:33 -33 Type II, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

Container for Battery Fluid Acid shall conform to latest version of IATA

specification for plastic containers, overpack within a 4G fiberboard

box, Box shall be one per battery.

THIS MATERIAL IS CONSIDERED HAZARDOUS MATERIAL AND REQUIRES SPECIAL

PACKAGING, MARKING, AND LABELING. PLEASE ENSURE THAT ALL PACKAGING

REQUIREMENTS AS DETAILED IN THE CONTRACT ARE MET. THIS BATTERY IS

REGULATED BY THE DEPARTMENT OF TRANSPORTATION (DOT). A MATERIAL SAFETY

DATA SHEET SHALL ACCOMPANY EACH SHIPMENT.

HAZARDOUS MATERIAL PACKAGING REQUIREMENTS SHALL COMPLY WITH TITLE 49

CODE OF FEDERAL REGULATIONS (CFR). AUTHORIZED SPECIFICATION PACKAGINGS

FOR BATTERIES ARE LOCATED IN TITLE 49 CFR, PARAGRAPH 173.159. SELECTION

OF AUTHORIZED SPECIFICATION PACKAGINGS MUST ENSURE IT DOES NOT EXCEED

THE WEIGHT AND SIZE LIMITATIONS OF THE CONTAINER.

SELECTED AUTHORIZED SPECIFICATION PACKAGINGS SHALL ADEQUATELY PROTECT

THE BATTERY AGAINST SHOCK AND VIBRATION AND ENSURE TABS TO DO NOT BREAK

AND CAUSE AN INTERNAL SHORT CIRCUIT WITHIN THE BATTERY. AUTHORIZED

SPECIFICATION PACKAGINGS (CONTAINERS) SHALL NOT BE DAMAGED IN ANY WAY.

ASSETS UNDER THESE CONDITIONS SHALL BE CONSIDERED AN UNACCEPTABLE

PRODUCT AND SHALL NOT BE SHIPPED TO ANY DEPOT, OR CUSTOMER, OR RECEIVED

INTO ANY DOD INVENTORY SYSTEM. MATERIAL WILL BE REFUSED AND RETURNED TO

CONTRACTOR.

EACH CONTAINER SHALL BE MARKED AND LABELED IN ACCORDANCE WITH THE

GOVERNING HAZARDOUS MATERIAL REGULATION (DEPENDENT UPON MODE OF

TRANSPORTATION) AND IN ACCORDANCE WITH MIL-STD-129 TO BE PROPERLY

IDENTIFIED AND RECEIVED INTO INVENTORY. SHELF LIFE MARKINGS SHALL BE

APPLIED TO THE CONTAINER'S LABEL TO ENSURE STORAGE CONTROLS ARE IN PLACE

AND INSPECTION DATA IS AVAILABLE.

PROPER SHIPPING NAME, UN NUMBER, HAZARD CLASS, AND PACKING GROUP

REQUIRED TO BE MARKED ON EACH CONTAINER

HAZARD WARNING LABEL REQUIRED ON EACH AUTHORIZED PACKAGING (CONTAINER):

CORROSIVE, AS DISPLAYED BELOW. IN ADDITION, ORIENTATION LABELS SHALL BE

APPLIED TO THE PACKAGE TO ENSURE IT DOES NOT LEAK (ARROW UP,

ILLUSTRATION ONLY).

ALL IDENTIFICATION MARKINGS AND HAZARD WARNING LABELS SHALL BE PLACED ON

THE SAME CONTAINER PANEL.

ALL NON-POP CONTAINERS SHALL MEET BOX MAKERS CERTIFICATE REQUIREMENTS IN

ORDER TO ADEQUATELY HOLD LOAD IMPOSED. CHECK SPECIFICATION FOR WEIGHT

LIMITATION AND CHECK PACKAGED WEIGHT TO ENSURE THE CONTAINER CAN

ADEQUATELY PROTECT THE BATTERY DURING HANDLING, STORAGE, AND/OR

TRANSPORTATION.

SHIPMENTS BY MILITARY AIR SHALL USE AFMAN 24-204 SHIPPERS DECLARATION TO

ENSURE MATERIAL WILL NOT BE FRUSTRATED AT AERIAL PORTS.

Attachments/Links